New Products

The product specifications, appearance and drawings on this Web site may be subject to change without notice due to product improvement.

INQUIRY for new products

Product Name and Model General description Catalogue (PDF)
November 17, 2016 on sale
NC Rotary Table
RKT180
RKT180
Click the picture to enlarge
RKT180, High-speed & Low maintenance NC Rotary Table, is suitable for automotive parts manufacturing. Non backlash is achieved by its Roller gear & cam structure and less maintenance is needed. Catalogue
April 2, 2012 on sale
NC Rotary Table
MRT200
MRT200
Click the picture to enlarge
Top mounted motor NC Rotary Table, MRT200 is on sale. MRT200 allows optimal stroke for Y-axis, and is suitable for trunnion assembly use. Its mounting dimension of chuck or jigs is equivalent to our standard model, MR series. Catalogue
( 747KB )
February 2, 2012 on sale
Mega Thru-Hole NC Rotary Table
TP530
TP530
Click the picture to enlarge
TP530 is suitable for machining large workpieces.
This dia. 345mm thru-hole NC Rotary Table enables to machineoil pipes etc. Its high stiffness mechanical structure is designed to suit heavy machining, and 2,600N·m allowable cutting torque with 6,100N·m clamping torque increased to 200% of that of the conventional product.
Catalogue
( 747KB )
January 5, 2012 on sale
Power Wing Work Gripper / Inner Diameter Pull Lock Work Gripper
PWS06 / PUES06
PWS06PUES06    
Click the picture to enlarge
PWS06 and PUES06 have cylinders built-in and enable to reduce the introduction cost.
PWS06 supplies stable clamping by pull back the workpiece suitable for rough machining.
PUES06 pulls back and clamps the inner diameter of workpiece suitable for finish machining
with stable machining accuracy.
Catalogue
( 1587KB )
January 12, 2010 on sale
MC Compact Clamper
VAX125
VAX125
Click the picture to enlarge
 VAX125 is a compact clamper with versatile clamping for 5-axis machines.
 Optional jaws are available to accommodate various workpiece, and 40kN max. clamping torque by built-in toggle joint mechanism allows to clamp many kinds of materials from hard to soft.
Catalogue ( 1656KB )

Note) Adobe(R) Acrobat(R)Reader is required for PDF data. AcrobatReaderR5.0 or uper grade should be used.
The data is downloaded by left click and AcrobatReader is run.
A4 size of paper should be used.

Kitagawa Iron Works Co., Ltd. All Rights Reserved.