Side Mounted Motor (Vertical) Type  TR Series

Specification and Product data are available. CAD free download.

TR Series
Click the picture to enlarge
 

TR Series

  • Suitable for either vertical or horizontal use
  • High rigidity for heavy cutting
  • Large thru-hole
  * CE correspondence

Model TRX320 TR400 TR500 TR630
Table dia (mm) ø 320 ø 400 ø 500 ø 630
Register diameter on Face Plate (mm) ø 135H7 ø 180H7 ø 200H7 ø 280H7
Spindle through hole diameter (mm) ø 110 ø 150 ø 170 ø 250
Centre Height (mm) 225 255 310 400
Clamping method Air-Hydraulic / Hydraulic Air-Hydraulic / Hydraulic Air-Hydraulic / Hydraulic Air-Hydraulic / Hydraulic
Clamping Torque (N·m)
(TRX-in pneumatic 0.5MPa/TRM-in pneumatic 0.45MPa / hydraulic 3.5MPa)
2600 2500 3200 4000
Motor axis reduced inertia (kg·m2) 0.00085 0.0028 0.0028 0.0064
Gear ratio 1/180 1/180 1/180 1/180
Max. spindle speed
(for min-1)
16.6
(motor 3000min-1)
8.3
(motor 1500min-1)
8.3
(motor 1500min-1)
8.3
(motor 1500min-1)
Allowable work inertia (kg·m2) 4.48 10.00 18.73 49.62
Indexing accuracy (sec) 20 20 20 20
Repeatability (sec) 4 4 4 4
Mass of product (kg) 196 350 550 900
Allowable Load Horizontal (kg) 350 500 600 1000
Vertical (kg) 180 250 300 400
Manual tailstock
(as an option)
TS320RN TS400RN TS500RN TS630RN
Tail spindle
(as an option)
TSR181A45 Order production Order production Order production
Rotary joint
(as an option)
RJ70H32K02
Hydraulic /Pneumatic 6-port
Order production Order production Order production
Outline Drawing(Kitagawa own controller) PDF
Instruction
- - -
TIF
Instructionn
- - -
DXF
Instruction
- - -
DWG
Instruction
- - -
Option Tailstock    Tailspindle
Kitagawa Iron Works Co., Ltd. All Rights Reserved.