Side Mounted Motor (Horizontal) Type TMX Series

Specification and Product data are available. CAD free download.

KITAGAWA's basic NC Rotary Table.
Table worm gear adopts large diameter and double-lead contact method.
Backlash adjuctment eliminates less tooth contact.
Special cross roller bearing eliminate distortion and displacement caused by loadings.
High clamp torque available by large cylinder and special flange.
Suitable for both vertical and horizontal use.
Provide with KITAGAWA controller MAC mini as option.

Model		TMX160	TMX200	TMX250
Table dia (mm)		ø 165	ø 200	ø 250
Datum-hole Diameter (mm)		ø 50H7	ø 75H7	ø 105H7
Thru-hole Diameter (mm)		ø 40	ø 52	ø 78
Center Height (mm)		120	140	180
Clamping method		Air-Hydraulic / Hydraulic	Air-Hydraulic / Hydraulic	Air-Hydraulic / Hydraulic
Clamping torque(N·m) (in pneumatic 0.5MPa / hydraulic 3.5MPa)		450	600	1100
Motor axis reduced inertia (kg·m²)		0.00012	0.00032	0.00056
Gear ratio		1/72	1/90	1/120
Max. spindle speed (for min^-1/ motor 3000min^-1)		41.6	33.3	25
Allowable work inertia (kg·m²)		0.51	1.00	1.95
Indexing accuracy (sec)		20	20	20
Repeatability (sec)		4	4	4
Mass of product (kg)		56	60	101
Allowable Load	Horizontal (kg)	160	200	250
Allowable Load	Vertical (kg)	80	100	125
Manual tailstock (as an option)		TS160RN	TS200RN	TS250RN
Tail spindle (as an option)		TSR121A	TSR142A	TSR180A
Rotary joint (as an option)		RJ40H16D01 Hydraulic /Pneumatic 4-port	RJ40H20D03 Hydraulic /Pneumatic 4-port	RJ70H25D05 Hydraulic /Pneumatic 6-port
Outline Drawing	PDF Instruction
	TIF Instruction
	DXF Instruction
	DWG Instruction
Option		Tailstock Tailspindle