Back-side Mounted Motor Type TBX Series
Specification and Product data are available. CAD free download.
 Click the picture to enlarge |
TBX Series
* CE correspondence
|
| Model | TBX160 | TBX200 | TBX250 | TBX320 | |
|---|---|---|---|---|---|
| Table dia (mm) | ø 165 | ø 200 | ø 250 | ø 320 | |
| Register diameter on Face Plate (mm) | ø 50H7 | ø 75H7 | ø 105H7 | ø 135H7 | |
| Spindle through hole diameter (mm) | ø 40 | ø 52 | ø 78 | ø 110 | |
| Center Height (mm) | 120 | 140 | 180 | 225 | |
| Clamping method | Air-Hydraulic / Hydraulic | Air-Hydraulic / Hydraulic | Air-Hydraulic / Hydraulic | Air-Hydraulic / Hydraulic | |
| Clamping Torque (N·m) (in pneumatic 0.5MPa / Hydraulic 3.5MPa) |
450 | 600 | 1100 | 2600 | |
| Motor axis reduced inertia (kg·m2) | 0.00032 | 0.00087 | 0.00112 | 0.00147 | |
| Gear ratio | 1/72 | 1/90 | 1/120 | 1/180 | |
| Max. spindle speed (for min-1/ motor 3000min-1) |
41.6 | 33.3 | 25 | 16.6 | |
| Allowable work inertia (kg·m2) | 0.26 | 0.50 | 0.98 | 2.24 | |
| Indexing accuracy (sec) | 20 | 20 | 20 | 20 | |
| Repeatability (sec) | 4 | 4 | 4 | 4 | |
| Mass of product (kg) | 66 | 74 | 135 | 220 | |
| Allowable load | Horizontal (kg) | - | - | - | - |
| Vertical (kg) | 80 | 100 | 125 | 180 | |
| Manual tailstock (as an option) | TS160RN | TS200RN | TS250RN | TS320RN | |
| Tail spindle (as an option) | TSR121A | TSR142A | TSR180A | TSR180A-45 | |
| Outline Drawing | PDF Instruction |
- |  |
|
|
| TIF Instruction |
- |  |
|
|
|
| DXF Instruction |
- |  |
|
|
|
| DWG Instruction |
- |  |
|
|
|
| Option | Tailstock Tailspindle | ||||