High Speed NC Rotary Table  MX160

Specification and Product data are available. CAD free download.

MX160
Click the picture to enlarge
 

MX160

  • Speed increased to 75min-1

    allowing reduced takt time.

  • Indexing time is reduced by 39% when compare to existing products. (with KITAGAWA own controller)
  • Monuting dimensions equivalent to MR Series.
  * CE correspondence

Model MX160
Table dia (mm) ø 165
Register diameter on Face Plate (mm) ø 50H7
Spindle through hole diameter (mm) ø 40
Centre Height (mm) 140
Clamping method Pneumatic
Clamping torque (N·m)
(In pneumatic 0.5MPa)
310
Motor axis reduced inertia (kg·m2) 0.00023
Gear ratio 1/40
Max. spindle speed (for min-1/ motor 3000min-1) 75
Allowable work inertia (kg·m2) 0.25
Indexing accuracy (sec) 40
Repeatability (sec) 8
Mass of product (kg) 43
Allowable load Horizontal (kg) 80
Vertical (kg) 40
Manual tailstock (as an option) MR160RN
Tail spindle (as an option) MSR142A/TSR142A
Rotary joint (as an option) RJ40H16P01
Hydraulic /Pneumatic 4-port
Outline Drawing
(Kitagawa own controller)
PDF
Instruction
TIF
Instruction
DXF
Instruction
DWG
Instruction
Option Tailstock      Tailspindle

Kitagawa Iron Works Co., Ltd. All Rights Reserved.