NC Rotary Table  MRT200

Specification and Product data are available. CAD free download.

MRT200
Click the picture to enlarge
 

MRT200

  • Less interference.
  • High cost-performance.
  • Compact design with pneumatic clamping system.
  * CE correspondence

Model MRT200
Table dia (mm) ø 202
Register diameter on Face Plate (mm) ø 65H7
Spindle through hole diameter (mm) ø 45
Centre Height (mm) 140
Clamping method Pneumatic
Clamping torque (N·m)
(In pneumatic 0.5MPa)
350
Motor axis reduced inertia (kg·m2) 0.00017
Gear ratio 1/90
Max. spindle speed (for min-1) 33.3
(M signal specification:motor3000min-1)
Allowable work inertia (kg·m2) 1.00
Indexing accuracy (sec) 20
Repeatability (sec) 4
Mass of product (kg) 70
Allowable Load Horizontal (kg) -
Vertical (kg) 100
Manual Tailstock (as an option) MR200RN
Tail Spindle (as an option) MSR142A/TSR142A
Rotary Joint (as an option) RJ40H20Q02
Hydraulic / Pneumatic 4-port
Outline Drawing
(Kitagawa own controller)
PDF
Instruction
TIF
Instruction
DXF
Instruction
DWG
Instruction
Option Tailstock    TailSpindle
Kitagawa Iron Works Co., Ltd. All Rights Reserved.