For Wire-cut EDM  DM100·DME100

Specification and Product data are available. CAD free download.

RSM100
Click the picture to enlarge
 

DM100·DME100

  • NC Rotary Table for wire-cut EDM.
  • Waterproof, rustproof.
  • Dia. 40mm thru-hole is available for long workpiece(DM100).
  • High accuracy and function.
  * CE correspondence

Model DM100 DME100
Table dia (mm) ø 100 ø 100
Register diameter on Face Plate (mm) ø 45H7 ø 45H7
Spindle through hole diameter (mm) ø 40 ø 26 / ø 36
Centre Hight (mm) 65 65
Motor axis reduced inertia (kg·m2) 0.000054 0.000054
Gear ratio 1/120 1/120
Max. spindle speed
(for min-1)
3.0
(M signal specification:motor360min-1)
3.0
(FANUC specification:motor360min-1)
Min. spindle speed
(for min-1)
0.03
(M signal specification:motor3.6min-1)
0.00275
(FANUC specification:motor0.33min-1)
Allowable work inertia (kg·m2) 0.025 0.025
Indexing accuracy (sec) 30 16
Repeatability (sec) 5 4
Mass of product (kg) 20 25
Max. Machine current (A) Less than 20 Less than 20
Protection grade IP68(submerged 0.5m)
However, piping opening part is excluded.
IP68(submerged 0.5m)
However, piping opening part is excluded.
Allowable Load Vertical (kg) 20 20
Manual Tailstock
(as an option)
DM100RN01 DM100RN01
Outline Drawing PDF
Instruction
TIF
Instruction
DXF
Instruction
DWG
Instruction
Kitagawa Iron Works Co., Ltd. All Rights Reserved.