Ultra Compact NC Rotary Table   CK(R) Series

Specification and Product data are available. CAD free download.

CK(R) Series
Click the picture to enlarge
 

CK(R) Series

  • The World's thinnest body
  • Suitable for small-footprint machines
  * CE correspondence

Model CK160 CKR160
Table dia (mm) ø 114 ø 114
Register diameter on Face Plate (mm) ø 65H7 ø 65H7
Spindle through hole diameter (mm) ø 65 -
Centre Height (mm) 140 140
Clamping method Pneumatic Pneumatic
Clamping torque (N·m)
(In pneumatic 0.5MPa)
340 340
Motor axis reduced inertia (kg·m2) 0.00009 0.00009
Gear ratio 1/72 1/72
Max. spindle speed
(for min-1)
41.6
(M signal specification:motor3000min-1)
41.6
(M signal specification:motor3000min-1)
Allowable work inertia (kg·m2) 0.51 0.51
Indexing accuracy (sec) 20 20
Repeatability (sec) 4 4
Mass of product (kg) 40 41
Allowable load Horizontal (kg) 160 160
Vertical (kg) 80 80
Tail spindle (as an option) MSRC140/TSRC140
MSR142A/TSR142A
MSRC140/TSRC140
MSR142A/TSR142A
Rotary joint (as an option) - Hydraulic /Pneumatic 7-port
Outline Drawing
(Kitagawa own controller)
PDF
Instruction
   
TIF
Instruction
   
DXF
Instruction
   
DWG
Instruction
   
Option Tailspindle

Model CK200 CKR200
Table dia (mm) ø 130 ø 130
Register diameter on Face Plate (mm) ø 65H7 ø 65H7
Spindle through hole diameter (mm) ø 65 -
Centre Height (mm) 150 150
Clamping method Pneumatic Pneumatic
Clamping torque (N·m)
(In pneumatic 0.5MPa)
400 400
Motor axis reduced inertia (kg·m2) 0.00017 0.00017
Gear ratio 1/120 1/120
Max. spindle speed
(for min-1)
25
(M signal specification:motor3000min-1)
25
(M signal specification:motor3000min-1)
Allowable work inertia (kg·m2) 1.00 1.00
Indexing accuracy (sec) 20 20
Repeatability (sec) 4 4
Mass of product (kg) 47 49
Allowable load Horizontal (kg) 160 160
Vertical (kg) 80 80
Tail spindle (as an option) MSRC150/TSRC150 MSRC150/TSRC150
Rotary joint (as an option) - Hydraulic /Pneumatic 8-port (Note)
Outline Drawing
(Kitagawa own controller)
PDF
Instruction
TIF
Instruction
DXF
Instruction
DWG
Instruction
Option Tailspindle

Note)All ports are available for both pneumatic and hydraulic, not available for coolant.


Kitagawa Iron Works Co., Ltd. All Rights Reserved.